Analysis of Changes in Heat Exchanger Performance in PK-XXX Aircraft with Material Modification Using Ansys Program

Antonius Angga A, Nanang Ruhiyat

Abstract


Airplanes are popular transportation for the community in general because they have various advantages over other existing transportation. Airplanes have a relatively short time to travel between islands. Safety and comfort are major factors in the operation of an aircraft. One of the safety factors in an aircraft is the air supply, one of the supporting components of the air supply is a heat exchanger. The heat exchanger keeps the temperature of the air entering the Air Cycle Machine at its operating temperature. The Heat Exchanger in this journal is a type for the Boeing 737-500 aircraft which has a significant decrease in performance which results in damage to ACM components. A plate and frame heat exchanger with aluminum alloy material will be compared with a copper heat exchanger using the Ansys program to determine the effectiveness of both. The analysis will be carried out using the calculation method as well as running tests on the Heat Exchanger, and using Ansys for testing material modification.


Keywords


Airplane; heat exchanger; ansys, modification

Full Text:

PDF

References


Agussani. (2020). Implementation Analysis of Trans Mebidang Program in Transportation Mode Services, North Sumatera (Comperative Study of Medan City). Budapest International Research and Critics Institute-Journal (BIRCI-Journal). P. 1167-1174.

Al Ali, Abdulla R., Janajreh, Isam. (2015). Numerical Simulation of Turbine Blade Cooling via Jet Impingement. Energy Procedia 75 : 3220-3229.

ASM International. (1996). Choosing a cleaning process. ASM International : ISBN 0-87170-572-9.

ASM International. (1997). Guide to acid, alkaline, emulsion, and ultrasonic cleaning. ASM International : ISBN 0-87170-577-X.

ASM International. (1996). Guide to vapour degreasing and solvent cold cleaning. ASM International : ISBN 0-87170-573-7.

ASM International. (1996). Guide to mechanical cleaning systems. ASM International : ISBN 0-87170-574-5.

ASM International. (1996). Guide to pickling and descaling, and molten salt bath cleaning. ASM International : ISBN 0-87170-576-1.

Atikayanti, Muthia Sari. (2018). Analisis Perbandingan Heat Exchanger Tipe Plate-Frame Dan Shell And Tube Pada Intercooler. ISSN 2085-2762.

Barbara Kanegsberg ed. (2001). Handbook for critical cleaning. CRC Press : ISBN 0-8493-1655-3.

Carole A. LeBlanc. (2001). The search for safer and greener chemical solvents in surface cleaning : a proposed tool to support environmental decision-making. Erasmus University Centre for Environmental Studies.

Chin Yung Shin, Normah Mohd-Ghazali. (2016) CFD Simulation of A Plate Heat Exchanger with Trapezoidal Chevron. Faculty of Mechanical Engineering, Universiti Teknologi Malaysia.

David S. Peterson. (1997). Practical guide to industrial metal cleaning. Hanser Gardner Publications : ISBN 1-56990-216-X

El-Shazly, Alaa A. (2016). Gas Turbine Performance Enhancement via Utilizing Different

Fatimah, Mohamed Yusop. (2016) The Development Of Euler Solver Based Code For External Aerodynamics Flow. Universiti Tun Hussein Onn Malaysia

Integrated Turbine Inlet Cooling Techniques. Alexandria Engineeering Journal 55: 1903-1914.

International Inc, Honeywell. (2015). Component Maintenance Manual with Illustrated Parts List. Honeywell.

John B. Durkee. (2006). Management of Industrial Cleaning Technology and Processes. Elsevier : ISBN 0-08-044888-7.

Klaus-Peter Müller. (2003). Praktische Oberflächentechnik. Edition XII. Braunschweig/Wiesbaden.

Learning Services, GMF. (2018). Training Manual B737-600/700/800/900 (CFM56). GMF Learning Center

Liu, J.H., Liu, Y.B., Liu, L. (2018). Film Cooling Modeling of a Turbine Vane with Multiple Configurations of Tholes. Energy 11: 71-80.

Moran, Michael J. (2007). Termodinamika Teknik Jilid 2. Erlangga .

Malcolm C. McLaughlin. (2000). The aqueous cleaning handbook : a guide to critical-cleaning procedures, techniques, and validation. The Morris-Lee Publishing Group : ISBN 0-9645356-7-X

Suryasa Majanasastra, R. Bagus. (2016) Analisis Sifat Mekanik dan Struktur Mikro Hasil Proses Hydroforming Pada Material Tembaga (Cu) C84800 dan Aluminium Al 6063. Jurnal Imiah Teknik Mesin, Vol. 4




DOI: https://doi.org/10.33258/birci.v4i4.3214

Article Metrics

Abstract view : 0 times
PDF - 1 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.