Analysis Quality Control of White Tofu Products using The Six Sigma Method at UD Al Jaliil Tofu Factory in Jember Regency

Qurrotul‘ Aini, R. Abdoel Djamali

Abstract


UD Al Jaliil is one of the white tofu producing agroindustry in Jember Regency. The challenge faced in maintaining quality is that defective products are still found. To deal with this problem, UD Al Jaliil needs to carry out quality control using the Six Sigma method. This study aims to 1) analyze the implementation of quality control at UD Al Jaliil using the Six Sigma method 2) determine the DPMO value and Sigma level of white tofu products 3) identify the factors that cause defective products so that efforts to improve the quality of white tofu can be determined. Quality control is carried out using the Six Sigma method. Six Sigma is a quality control method by reducing the level of defects through five DMAIC stages, namely Define, Measure, Analyze, Improve and Control. The results showed that the process at UD Al Jaliil had not been fully controlled properly because there were still processes that were outside the control limits. The DPMO value of 306,300 units/process means that in one million products produced there is a possibility of 306,300 defective products. The Sigma level of UD Al Jaliil is 2.0064 Sigma. And there are several factors that cause texture defects of white tofu, namely man, machine, method, material and environment factors.

Keywords


White tofu; quality control; six sigma; texture test; organoleptic test

Full Text:

PDF

References


V. Gaspersz, Pedoman Implementasi Program Six Sigma Terintegrasi dengan ISO 9001:2000, MBNQA, dan HACCP. Jakarta: Jakarta: Gramedia Pustaka Utama, 2002.

Sarwono dan Y. P. Saragih, Membuat Aneka Tahu. Depok: Depok: Penebar Swadaya, 2001.

D. Dinas Perindustrian dan Perdagangan, Data Penyebaran Agroindustri Tahu. Kabupaten Jember, 2010.

H. Tannady, Pengendalian Kualitas, Cetakan 1. Yogyakarta: Yogyakarta: Graha Ilmu, 2015.

A. Syukron dan M. Kholil, Six Sigma Quality for Business Improvement, Cetakan 1. Yogyakarta: Yogyakarta: Graha Ilmu, 2013.

H. C. Wahyuni, W. Sulistiyowati, dan M. Khamim, Pengendalian Kualitas: Aplikasi pada Industri Jasa dan Manufaktur dengan Lean, Six Sigma dan Servqual. Yogyakarta: Graha Ilmu, 2015.

I. Irwan dan D. Haryono, Pengendalian Kualitas Statistik (Pendekatan Teoritis dan Aplikatif). Bandung: Bandung: Alfabeta, 2015.

B. Badan Standardisasi Nasional, “Standar Nasional Indonesia tentang Tahu,” Sni 01-3142-1998, hal. 1, 1998.

D. N. Midayanto dan S. S. Yuwono, “Penentuan Atribut Mutu Tekstur Tahu untuk Direkomendasikan sebagai Syarat Tambahan dalam Standar Nasional Indonesia,” Pangan dan Agroindustri, vol. 2, no. 4, hal. 259–267, 2014.

D. I. Bunta, A. S. Naiu, dan N. S. Yusuf, “Pengaruh Penambahan Tepung Tulang Ikan Tuna terhadap Karakteristik Hedonik Kue Bagea Khas Gorontalo,” J. Ilm. Perikan. dan Kelaut., vol. 1, no. 2, hal. 81–88, 2013, [Daring]. Tersedia pada: http://ejurnal.ung.ac.id/index.php/nike/article/viewFile/1225/974

P. Nugroho, B. Dwiloka, dan H. Rizqiati, “Rendemen, Nilai pH, Tekstur, dan Aktivitas Antioksidan Keju Segar dengan Bahan Pengasam Ekstrak Bunga Rosella Ungu (Hibiscus sabdariffa L.),” J. Teknol. Pangan, vol. 2, no. 1, hal. 33–39, 2018.




DOI: https://doi.org/10.33258/birci.v6i3.7671

Article Metrics

Abstract view : 2 times
PDF - 2 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

 

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.