_.gif)
_.gif)
Study on Planning for 150 Kv Outdoor System Substation at Substation Paya Geli, North Sumatra
Abstract
The substation is an important part of the power system. In addition to substations for power generation, they must be able to distribute power reliably and safely. In this study, based on the SPLN standard, I analyzed and calculated the components of the Paya Geli substation so that the selected components could actually conduct electricity properly and safely. The selection of the substation components in Paya Geli was based on these calculations and criteria. From this it can be concluded that the design results of the Paya Geli substation are in accordance with the design.
Keywords
Full Text:
PDFReferences
ABB Manual Switchgear 11thEditions. Germany: ABB, 2008.
Arismunandar, DR.A., Kuwuhara, DR. your milk. Electrical Power Engineering Handbook. Jakarta: PT Pradinya Pramita: 2004.
IEC 600671 Edition 2.1 Power Transformer part 1 Ganeva: International Electrotechnical Commission, 1999.
IEC 600694 Edition 2.1 Power Transformer part 5 Ganeva: International Electrotechnical Commission, 1996.
IEC 60071-2 Edition 44.1 Instrument Transformer part 1 Ganeva:
Marsudi, Djieteng. Electric Power System Operation.
SNI 04-0225-2000, General Requirements for Electrical Installation 2000 (PUIL 2000). Jakarta: National Standardization Bada, December 2000
State Electricity General Company Standard 7:1978. Division of Tasks Groups - Standardization Groups. Jakarta: State Electricity Company, August 1978.
DOI: https://doi.org/10.33258/birex.v4i4.7252
Article Metrics
Abstract view : 22 timesPDF - 10 times
Refbacks
- There are currently no refbacks.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.