Determination of the Temperature of the Components of a Raw Cotton

Khonimkul Normamatovich Pardaev, Alisher Zununovich Mamatov, Obid Kosimov

Abstract


The article considers one boundary value problem for systems of parabolic type, consisting of two differential equations for determining the temperature and moisture content of a lump of raw cotton during drying in dryers. Based on the laws of thermodynamics (the laws of thermal conductivity of Fourier, Newton, conservation of energy, etc.), this problem is formulated as a system of differential equations of parabolic type An approximate solution of the problem under consideration was constructed using the variational-grid method, and a comparative analysis with experimental data was carried out. To solve this problem, was used the Galerkin variational method, i.e. introduce the basis function ji(x) satisfying the conjugacy condition ji(0)=0. A comparative analysis shows that the error in the calculated and experimental data is no more than 4-5%. And this makes it possible to analyze the heating rate in the form of a lump.

Keywords


dryer, temperature, humidity, mathematical model, algorithm, lump, raw cotton

Full Text:

PDF

References


Dai J., Dong H. Intensive cotton farming technologies in China: Achievements, challenges and countermeasures //Field Crops Research. – 2014. – vol. 155. – p. 99-110.

Mukai Y., Suh M. Design and characterization of a cotton fabric antenna for on-body thermotherapy //Journal of Industrial Textiles. – 2022. – p. 15280837221107160.

Zhou, C., Dong, J., Zhang, S., Zhang, Q., Wang, M., Zheng, L., & Jiang, W. (2022). Classification of waste cotton from different countries using the near-infrared technique. Textile Research Journal, 00405175221116059.

Dash, Ashwini Kumar, and Sanat Kumar Sahoo. "Role of Enzymes in Textile Processing." Bioprospecting of Enzymes in Industry, Healthcare and Sustainable Environment. Springer, Singapore, 2021. 395-410.

Mojsov, K., Janevski, A., Andronikov, D., Jordeva, S., Kertakova, M., Golomeova, S., & Ignjatov, I. (2019). Behaviour of biopolishing on dyeability and certain properties of cotton fabrics. Tekstilna industrija, 67(1), 20-24.

Glynis, Antonios, et al. "Regenerative endodontic procedures for the treatment of necrotic mature teeth with apical periodontitis: a systematic review and meta-analysis of randomized controlled trials." Journal of Endodontics 47.6 (2021): 873-882.

Trache, D., Tarchoun, A. F., Derradji, M., Hamidon, T. S., Masruchin, N., Brosse, N., & Hussin, M. H. (2020). Nanocellulose: from fundamentals to advanced applications. Frontiers in Chemistry, 8, 392.

Ge, S., Manigandan, S., Mathimani, T., Basha, S., Xia, C., Brindhadevi, K., & Pugazhendhi, A. (2022). An assessment of agricultural waste cellulosic biofuel for improved combustion and emission characteristics. Science of The Total Environment, 813, 152418.

Karlsson, Bo, and Monika Kurkkio. "Using calculations in the early phase of strategic capital investment projects–insights from the mining industry." Qualitative Research in Accounting & Management (2018).

Lima, M. C. R., Ramos, J. E. S., Borba, M. C., Schultz, G., & Révillion, J. P. P. (2022). A dinâmica análise das ações estratégicas empresariais no agronegócio. Revista Tecnologia e Sociedade, 18(52), 285-307.

Parpiev A.P., Kayumov A.H., Pardayev H. «Effect of temperature of steady heating components of cotton-seed at drying process», European science review, vol.7-8, pp. 205-207, 2016.

Parpiyev A.P., Kayumov A.H., «Analytical review of the applied temperature in the process of drying raw cotton», Scientific and Technical Journal of FerPI, Vol.1, pp. 29-34. 2017.

Mamatov A., Parpiyev A., Kayumov A., Analysis of Heat Heat Transmission of Cotton-Raw Components, International Journal of Advanced Research in Science, Engineering and Technology, Vol. 5, Issue 12, December 2018. Р. 7534-7542

Mamatov A., Parpiyev A., Kayumov A., Мathematical models of the heat and mass exchange process during pneumo-transportation of cotton-raw// International Scientific Journal Theoretical & Applied Science , p-ISSN: 2308-4944 (print) e-ISSN: 2409-0085 (online) , Year: 2020 Issue: 11 ,Volume: 91, Р. 508-513.

Mamatov, A., Parpiev, A., Shorakhmedova, M. Mathematical model for calculating the temperature field of a direct-flow drying drum//Journal of Physics: Conference Seriesthis link is disabled, 2021, 2131(5), 052067

Mamatov, A.Z., Usmankulov, A.K., Abbazov, I.Z., Norboyev, U.A., Mukhametshina, E.T. Determination of Temperature of Components of Cotton-Raw Material in a Drum Dryer with a Constant// IOP Conference Series: Earth and Environmental Sciencethis link is disabled, 2021, 939(1), 012052

Mamatov, A.Z., Pardaev, X.N., Mardonov, J.S.H., Plekhanov, A.F. Determining of the heat-moisture stateof raw cotton in a drum dryer. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil'noi Promyshlennostithis link is disabled, 2021, 391(1), p. 46-49.

Mamatov, A.Z., Zulunov R., Sodikova М. Application Of Variational Grid Method For The Solution Of The Problem On Determining Mosture Content Of Raw Cotton In A Drum Dryer// The American Journal of Engineering and Technology (ISSN – 2689-0984) Published: February 26, 2021 | Pages: 75-82

Lykov A.V. Heat and mass transfer (directory). M.: Energiya, 1978. - 480 p.

Mixlin S.G. Numerical implementation of variational methods.-М.: The science.1966, -432 p.

M.V.K.Charis, J.Salon. Numerical Methods in Electromag-netism. Variation and Galerkin methods.-2000, Pages 143-187.

Schekoldin M.N. «Heat moisture state of raw cotton», State Gizlegprom Publishing House. 74 p., 1958.

Kh. Pardaev, I. Abbazov, B. Sharopov “Pneumotransport quvurlarida vujudga keladigan karshilik kuchlar tahlili” Respublika ilmiy-amaly anjuman maqolalar to’plami Toshkent, 2021. P. 165-167.

Kh.Pardaev, I.Abbazov, B.Sharopov “Paxtani havo yordamida tashuvchi pneumotransport tizimlari tahlili” Magistr talabalarining ilmiy maqololalar tuplami Tashkent-2021, 71-74.

Agzamov, Mirsolikh & Bakhtiyarovich, Rakhmatov & Agzamov, Mirkhosil. (2019). The Results of Research to Determine the Parameters of Hardening Working Area of the Gin and Linter Grates. Journal of Mechanical Engineering Research. 2. 23-25. 10.30564/jmer.v2i2.1574.

Agzamov, M., Agzamov, M. M., & Madgidov, G. F. (2007). Ways for improvement of cotton fiber quality in process of ginning. Izvestiia-Vysshie Uchebnye Zavedeniia Tekhnologiia Tekstil'noi Promyshlennosti, 3, 34

Agzamov M.M. (2021). The influence of the rotation speed of the raw roller on fiber quality and other indicators of the generation process. Izvestiya Vysshikh Uchebnykh Zavedenii, Seriya Teknologiya Tekstil'noi Promyshlennosti, (4), pp. 88–93.

Agzamov M.M. et al. (2021). Search for ways to increase yield and improve product quality in the process of saw ginning. IOP Conf. Ser.: Earth Environ. Sci. 939 012073. https://doi.org/10.1088/1755-1315/939/1/012073.

Agzamov M.M. et al. (2021). Research of the reasons of increased drop in cotton seeds after generation with reduced density of raw roller. IOP Conf. Ser.: Earth Environ. Sci. 939 012072. https://doi.org/10.1088/1755-1315/939/1/012072.

Agzamov M.M., Yunusov S.Z., Gafurov J.K. (2017). On the technological development of cotton primary processing, using a new drying-purifying unit. IOP Conf. Ser.: Mater. Sci. Eng. 254 082017. https://doi.org/10.1088/1757-899X/254/8/082017




DOI: https://doi.org/10.33258/birex.v5i3.7694

Article Metrics

Abstract view : 3 times
PDF - 1 times

Refbacks

  • There are currently no refbacks.


Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.

Creative Commons License
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
 

 

Statcounter for Budapest International Research in Exact Sciences (BirEx Journal)